LC-A+ with Instant Back

Today, I have done with the installation of Instant Back to LC-A+.

Actually, this was not an easy job. I did face with some problem to install.

First, I need to use knife to cut the leather as per instruction. But, the leather stick quite well with the camera, I think they put too much glue on it. So for the result, after the peeling, the leather was not that nice anymore.

The biggest problem was the screw. I unscrew 2 screws, the problem came with the other 2 screws. 1 cross head screw no longer had cross head, I can't screw it out. After a few tried, I decided to pull the back door out. I had no choice. When I pulled it out, I realized there was another screw. It covered by the leather which I did not clear it nicely when I was peeled it with knife. Gosh!!! I think I almost broke it. This is totally not an easy job!!! Especially with new camera!

Screw with the enclosed hinge. Glue back the leather. Attached the Instant back, and it was done. This took me some time. At last it was ready.

So, please read the manual clearly before doing this. This is a lesson.

But then, I can't test it. Because 2 pieces of CR2 batteries are not included!!! =_=|||

I not yet try with it. But soon, I will. Wait for it.